Command Communications ComSwitch 8500-t User Manual download pdf (Page 10)

One Line/Multiple Telephone Extensions

Plug one end of the provided 2-wire modular line cord into the LINE-IN port on the CS8500-t. Plug the

other end of the modular line cord into the telephone (wall) jack. Plug the small end of the AC power cord

provided with the CS8500-t into the power input port labeled "12 VAC" on the CS8500-t. Plug the

adapter into a standard AC outlet.

The green LED flashes for approximately 5 seconds when power is applied and then remains illuminated,

indicating its ON status.

1. To connect a TTY/TDD device, plug one end of a modular line cord into the TTY/TDD port on

the CS8500-t. Plug the other end to the line port of the TTY/TDD.

2. To connect an answering machine, plug one end of a modular line cord into the ANS. MACHINE

port on the CS8500-t. Plug the other end to the line port of the answering machine.

3. To connect a phone, plug one end of a modular line cord into the PHONE port on the CS8500-t.

4. To connect a fax machine, plug one end of a modular line cord into the FAX port on the CS8500-t.

Plug the other end to the line port of the fax machine.

NOTE: Set the TTY/TDD to answer on lowest rings possible or set for manual answer and answer when

the TTY/TDD rings.

7 CS8500-t Operator’s Guid

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 23 24

No comments

Command Communications ComSwitch 8500-t User Manual Page 10